electric-counterbalance-stacker,liftmaxx ES30-CAX

Designed for narrow aisle applications with high density racking systems

In contrast to traditional straddle stackers, the counterbalanced stacker forgoes stabilizing straddle legs in favor of a heavy counterweight.  This design eliminates the need for wider shelving and uniform pallet sizes, but also eliminates the need for a crossbar setup beneath the shelving to accommodate the straddles while picking up loads. Similar to the forkover design, the counterbalanced stacker is widely used in warehousing applications where loads are stacked side-by-side to increase storage density.

Stärke LiftMaxx 24v-AC Electric Counterbalanced Walkie Stacker is designed to provide the versatility of a traditional counterbalanced forklift with the design benefits of a walkie straddle stacker. Here, a counterbalanced weight replaces the stabilizing straddles found on a traditional pallet stacker to eliminate the need for wider shelving or crossbars in narrow aisle applications, thus increasing potential storage capacity.

The ES30-CAX is both durable and reliable with side mounted lift cylinders for a clear view through the mast and a compact design and low center of gravity for superior handling and stability.

  • Clear View Through Mast – Side mounted lift cylinders provide the operator an unobstructed view through the mast while also improving stability.
  • Efficient AC Output – Features a three phase AC motor, 24V industrial battery and regenerative braking system to ensure long and productive periods in between charges.
  • User-Friendly – A Curtis AC fully programmable controller, electric power steering, and stepless speed control combine to provide a smooth, precise and customizable experience.
  • Multiple Mast Configurations – Available with both a 2-stage and 3-stage mast, the ES30-CAX is able to reach a maximum lift height of 220.5”.
  • 110V Off-board Charger
  • Continuous Stability System
  • Curtis Controller
  • Ergonomic Handle
  • Hour Meter and BDI
  • Nylon Entry Rollers
  • Rabbit/Turtle Switch
  • Side Mounted Lift Cylinders
  • Stepless Speed Control
  • Vertical Drive Wheel
Capacity 3,000 lbs.
Lift Height 118" - 220"
Turning Radius 68.1"
Traveling Speed 3.6 mph (laden) / 3.7 mph (unladen)
Lifting Speed 4.7 in/s (laden) / 7.5 in/s (unladen)
Lowering Speed 16.5 in/s (laden) / 16.1 in/s (unladen)
Maximum Gradeability 6% (laden) / 10% (unladen)
Battery Type Industrial
Battery Voltage and Rated Capacity 24V / 320aH
Charger 110V Off-board
Drive Motor 1.6 HP
Lift Motor 4.0 HP
Control System Curtis 1230
Wheelbase 54.3"
Ground Clearance 2.2"
Mast Height Lowered 80.7" - 95.9"
Overall Length 104.3"
Overall Width 39.0"
Service Weight with Battery 4,576 lbs.

Contact Information

  • 402 Allanburg Road, Thorold, ON
  • Phone:

Request a Quote

    Full Name*
    Your Message